Paint correction in Colorado Springs.
Swirls, haze and wash marring machine-polished out of the clear coat, panel by panel, under inspection lights. In your garage or a covered spot.
Instant price
Mobile · Colorado Springspay when it's done
Mon–Sat · open 24 hoursAll packages →
What is paint correction?
Paint correction is machine polishing that removes a thin layer of clear coat to level out swirl marks, haze, water spots and light scratches, so the paint reflects light cleanly again. At LRS Custom Mobile Detailing it's $399 for a 1-step, $599 for a 2-step and $899 for a multi-step correction, done in your garage or a covered spot in Colorado Springs.
Swirls come out one pass at a time.
A dual-action polisher levels the clear coat around each scratch until light reflects straight again. Panel by panel, under inspection lights, measured so only the clear is touched.
- 1-step$399
- 2-step$599
- Multi-step$899
See the difference. Drag it.
BeforeAfterSwirls out. Reflection back.
Black paint shows every wash mark. Machine polishing levels the clear coat so light reflects straight again instead of scattering through thousands of fine scratches.
Book this resultPick the level.
Three levels, flat prices. The paint is inspected under light first and you're told which one it actually needs.
Swipe options →
1-Step Paint Correction
- Wash, clay & decontamination
- Paint inspected under lights
- Single-stage machine polish
- Removes light swirls & haze
- Panel wipe-down to check results
2-Step Paint Correction
- Everything in the 1-step
- Cutting compound stage
- Removes moderate swirls & light scratches
- Finishing polish for depth
- Best before a ceramic coating
Multi-Step Paint Correction
- Multi-stage compound & polish
- Targets heavy swirls & deeper marring
- Spot work on isolated defects
- Paint depth checked as we go
- Done over 1–2 days
Large trucks and heavily neglected paint can take longer. Anything beyond the listed scope is quoted before we start.
How is paint corrected?
Wash & decontaminate
A full hand wash, iron fallout remover and clay. Polishing over grit just grinds it in.
Inspect under light
Inspection lights show exactly where the swirls, holograms and scratches are, and how deep.
Compound & polish
Panel by panel with the right pad and product for that paint. Soft paint and hard paint need different combos.
Wipe & recheck
Every panel is wiped of polishing oils and rechecked, so what you see is the real result, not filler.
Protect it
Sealant at minimum. A ceramic coating locks the result in for years.
Correction, glaze or a buff?
Plenty of shops call a quick polish “correction.” Here's how to tell them apart.
| Paint correction | Glaze / filler | Quick buff | |
|---|---|---|---|
| What it does | Removes swirls by leveling the clear coat | Hides swirls by filling them | Removes some gloss-dulling film |
| How long it lasts | Until new swirls are put in | A few washes | Weeks |
| Inspected under light | Yes | No | Rarely |
| Good base for coating | Yes | No, coating won't bond | No |
Dry air. Dust. Dry towels.
Colorado Springs is dry and windy, so paint is almost always dusty. Wiping that dust off with a towel, or running through a brush wash, drags grit across the clear coat. Do it enough and the paint is covered in fine circular scratches that show up as a spiderweb in the sun.
Correction removes them. A ceramic coating and a proper two-bucket wash keep them from coming back.
- Dust + dry towelSwirls in weeks
- Brush car washesFast route to haze
- Two-bucket hand washHow we wash
Every make paints differently.
Hardness, thickness and finish change how paint is corrected. Pick your make.
Paint correction questions.
Straight answers to what people ask before they book. More in the answers hub.
Q01How much does paint correction cost in Colorado Springs?
At LRS Custom Mobile Detailing a 1-step paint correction (“Paint Enhancement”) is $399, a 2-step (“Color Restoration”) is $599 and a multi-step advanced correction is $899. The paint is inspected under light first, and you're told which level it needs before any polishing starts.
Q02What's the difference between 1-step and 2-step?
A 1-step is a single machine polish that removes light swirls and haze. A 2-step starts with a cutting compound for moderate swirls and light scratches, then refines with a polish for depth and clarity.
Q03Can paint correction remove scratches?
Swirls, wash marring and light scratches that sit in the clear coat, yes. If a scratch catches your fingernail, it's usually through the clear coat; polishing can soften how it looks but can't remove it.
Q04Is paint correction the same as buffing?
It's machine polishing done properly: wash, decontaminate, inspect under light, then correct panel by panel and wipe down to check the real result. A quick buff with a glaze fills swirls temporarily and washes off in a few weeks.
Q05Can paint correction be done mobile?
Yes, in a garage or covered spot. Polishing needs shade, still air and no dust, so we don't correct paint in direct sun or wind.
Q06Should I ceramic coat after paint correction?
If you want the result to last, yes. Correction removes the damage; a coating protects the corrected paint from the next round of swirls. Every LRS ceramic coating package already includes polishing.
Keep building. Related services.
Lock in your date.
Three quick steps. We get it right away and call or text to confirm the time and the spot.
- Pick the buildPackage and vehicle size. The price shows as you go.
- Pick a day & windowMorning, midday or afternoon, Monday through Saturday.
- Tell us whereDriveway, garage or work lot, and how to reach you.